You are here：West Lake Grinding Wheel Factory > News > Technical Support > How to use the automatic polishing machine
How to use the automatic polishing machine
How to use the automatic polishing machine
Start polishing process, first mentioned processing release lever, and then put down the handle, free floating polishing head up and down, to the safety lock button and forward rotation of the handle and open automatic polishing machine, opening after the success, thumb release from the safety lock button; mobile pipe polishing machine to "W" shape, or forward at the start of floor wax polishing layer.
Automatic polishing machine is the beginning of the production of automatic polishing machine to maintain the normal movement, this is done in order to avoid damage to the wax layer and floor surface, in order to prevent motor overload, the machine is equipped with a circuit overload protection device.
If circuit breaker, wait 10 seconds and can be reset; when the floor waxing polishing process is completed, is time to rotate backward rotation of the handle, the safety lock button is off, stopping the rotation of the polishing machine.
After the completion of the work, to maintain the automatic polishing machine back, the rear wheel, so as to prevent damage to the phenomenon, or do a polishing pad polishing pad under good storage, and finally polishing operation.
Start polishing process, first mentioned processing release lever, and then put down the handle, free floating polishing head up and down, to the safety lock button and forward rotation of the handle and open automatic polishing machine, opening after the success, thumb release from the safety lock button; mobile pipe polishing machine to "W" shape, or forward at the start of floor wax polishing layer.
Automatic polishing machine is the beginning of the production of automatic polishing machine to maintain the normal movement, this is done in order to avoid damage to the wax layer and floor surface, in order to prevent motor overload, the machine is equipped with a circuit overload protection device.
If circuit breaker, wait 10 seconds and can be reset; when the floor waxing polishing process is completed, is time to rotate backward rotation of the handle, the safety lock button is off, stopping the rotation of the polishing machine.
After the completion of the work, to maintain the automatic polishing machine back, the rear wheel, so as to prevent damage to the phenomenon, or do a polishing pad polishing pad under good storage, and finally polishing operation.
