You are here：West Lake Grinding Wheel Factory > News > Technical Support > Structure of grinding wheel machine
Structure of grinding wheel machine
Structure of grinding wheel machine
West Lake sand turbine is used to grinding tools, tools, commonly used equipment. Which is mainly composed of a base, wheel, motor or other power source, a bracket, a protective cover and water supply device, the grinding wheel is arranged on the top surface of the base, base which is used for accommodating the power source of the space, power source to drive a reducer, reducer with a piercing the base top surface of the drive shaft for fixing the grinding wheel and the bottom position of the base corresponding wheel with a concave catchment, catchment extends outward flow passage, the water supply device is arranged on the wheel side by side, the water supply device has a space for containing a liquid water, and one side of the water supply device which is corresponding to the grinding wheel with a water outlet. With the overall transmission mechanism is very streamlined and improved, so that the process of grinding more convenient and smooth and improve the overall efficiency of the grinding machine.
The grinding wheel is more fragile and the speed is high, and the safety operation regulations should be strictly followed:
1, the rotation direction of the grinding wheel machine to correct, can only make the wear debris down to fly away from the wheel.
2. After starting the grinding wheel machine, the grinding wheel should be carried out after the rotation of the turbine. If the sand turbine is obvious, it should be stopped in time.
3. The distance between the grinding wheel and the grinding wheel should be maintained at the 3mm distance to prevent the workpiece from entering into an accident.
4, grinding should stand on the side of the turbine, and the force should not be too large.
5, according to the use of the manual wheel, grinding wheel and grinder spindle speed match.
6, the new leader of the grinding wheel to have a factory certificate, or check test marks. If the quality of the grinding wheel is found, the quality of the grinding wheel, the hardness, the size of the grain and the appearance of the cracks are not used.
7, the installation of grinding wheel, the inner hole of the grinding wheel and the main shaft with the gap should not be too tight, should be in accordance with the technical requirements of the loose, the general control in the 0.05 /FONT>0.10 mm.
8, the grinding wheel to be fitted with flange plate, the diameter of the wheel is not less than 1/3 of the diameter of the wheel, wheel flange and flange gasket.
9, the nut is screwed to use special wrench, they must not be screwed too tight, is strictly prohibited with something hard hammer knock, prevent wheel hit the fragmentation.
10, the grinding wheel is installed, to install the protective cover, fender and bracket. The gap between the baffle plate and the bracket and the grinding wheel, should be maintained at 1? /FONT>3 mm, and slightly lower than the wheel center.
Not too fast, the new 11 wheel starts, first move, check, after 5 minutes after the turn? /FONT>10 test, you can use.
12, at the beginning of the grinding can not force too fast, so that the wheel is not the force of the accident.
13, prohibit grinding copper, lead, wood and other things, thus preventing the wheel impaction.
14, when the Mo, who should stand in the flank of grinder, not two people at the same time in a grinding wheel.
15, a tool for long time, should be timely cooling, to prevent hot.
16, the balance of the grinding wheel surface is always maintained, and the condition of the grinding wheel is kept in good condition.
17, a personnel should wear protective glasses.
18, vacuum cleaner must be intact and effective, such as fault is found, should be promptly repaired, it should stop sharpening.
West Lake sand turbine is used to grinding tools, tools, commonly used equipment. Which is mainly composed of a base, wheel, motor or other power source, a bracket, a protective cover and water supply device, the grinding wheel is arranged on the top surface of the base, base which is used for accommodating the power source of the space, power source to drive a reducer, reducer with a piercing the base top surface of the drive shaft for fixing the grinding wheel and the bottom position of the base corresponding wheel with a concave catchment, catchment extends outward flow passage, the water supply device is arranged on the wheel side by side, the water supply device has a space for containing a liquid water, and one side of the water supply device which is corresponding to the grinding wheel with a water outlet. With the overall transmission mechanism is very streamlined and improved, so that the process of grinding more convenient and smooth and improve the overall efficiency of the grinding machine.
The grinding wheel is more fragile and the speed is high, and the safety operation regulations should be strictly followed:
1, the rotation direction of the grinding wheel machine to correct, can only make the wear debris down to fly away from the wheel.
2. After starting the grinding wheel machine, the grinding wheel should be carried out after the rotation of the turbine. If the sand turbine is obvious, it should be stopped in time.
3. The distance between the grinding wheel and the grinding wheel should be maintained at the 3mm distance to prevent the workpiece from entering into an accident.
4, grinding should stand on the side of the turbine, and the force should not be too large.
5, according to the use of the manual wheel, grinding wheel and grinder spindle speed match.
6, the new leader of the grinding wheel to have a factory certificate, or check test marks. If the quality of the grinding wheel is found, the quality of the grinding wheel, the hardness, the size of the grain and the appearance of the cracks are not used.
7, the installation of grinding wheel, the inner hole of the grinding wheel and the main shaft with the gap should not be too tight, should be in accordance with the technical requirements of the loose, the general control in the 0.05 /FONT>0.10 mm.
8, the grinding wheel to be fitted with flange plate, the diameter of the wheel is not less than 1/3 of the diameter of the wheel, wheel flange and flange gasket.
9, the nut is screwed to use special wrench, they must not be screwed too tight, is strictly prohibited with something hard hammer knock, prevent wheel hit the fragmentation.
10, the grinding wheel is installed, to install the protective cover, fender and bracket. The gap between the baffle plate and the bracket and the grinding wheel, should be maintained at 1? /FONT>3 mm, and slightly lower than the wheel center.
Not too fast, the new 11 wheel starts, first move, check, after 5 minutes after the turn? /FONT>10 test, you can use.
12, at the beginning of the grinding can not force too fast, so that the wheel is not the force of the accident.
13, prohibit grinding copper, lead, wood and other things, thus preventing the wheel impaction.
14, when the Mo, who should stand in the flank of grinder, not two people at the same time in a grinding wheel.
15, a tool for long time, should be timely cooling, to prevent hot.
16, the balance of the grinding wheel surface is always maintained, and the condition of the grinding wheel is kept in good condition.
17, a personnel should wear protective glasses.
18, vacuum cleaner must be intact and effective, such as fault is found, should be promptly repaired, it should stop sharpening.
