You are here：West Lake Grinding Wheel Factory > News > Technical Support > Belt machine note
Belt machine note
Belt machine note
Before the inspection and abrasive belt machine abrasive belt machine maintenance work, must turn off the switch belt machine and unplug the power plug.
Dust bag 1, belt machine is full, should be empty, otherwise the suction performance will become bad belt machine.
2, belt machine to replace the carbon brush
A does not regularly and check to replace the carbon brush belt machine. When the wear line is worn to the maximum line, it will need to be replaced. To keep the brush clean it and make it in the clip can slide freely. Two carbon brushes should be replaced at the same time.
B with a screwdriver (charging screwdriver) brush off lid belt machine clamp. Remove the carbon brush wear, abrasive belt machine is inserted into the new brush, brush holder and tighten the lid.
Before the inspection and abrasive belt machine abrasive belt machine maintenance work, must turn off the switch belt machine and unplug the power plug.
Dust bag 1, belt machine is full, should be empty, otherwise the suction performance will become bad belt machine.
2, belt machine to replace the carbon brush
A does not regularly and check to replace the carbon brush belt machine. When the wear line is worn to the maximum line, it will need to be replaced. To keep the brush clean it and make it in the clip can slide freely. Two carbon brushes should be replaced at the same time.
B with a screwdriver (charging screwdriver) brush off lid belt machine clamp. Remove the carbon brush wear, abrasive belt machine is inserted into the new brush, brush holder and tighten the lid.
