You are here：West Lake Grinding Wheel Factory > News > Technical Support > Safety belt machine
Safety belt machine
Safety belt machine
In order to reduce accidents such as fire, electric shock, injury and so on, we must pay attention to the basic safety items listed below.
1, keep the workplace clean, use the belt machine most easily accident in the messy place or table.
2, pay attention to the workplace environment. Do not use electric tools in dark wet places. Abrasive belt machine can not get wet in the rain. The electric tool can not be used in the fuel gas, or in the presence of combustible gas.
3, do not let the child close. In the workplace should be banned people but can not let idlers touch tools or power supply connecting wires.
4, belt machine when not in use, should be kept in dry, and children can not come into contact with local, it is best to lock.
5, do not force the use of tools. Must be used at appropriate speed.
6, to use the tool, do not use a small tool or device to process this should use a large tool for the workpiece. Do not use the wrong tool.
7, pay attention to dress, the use of electric woodworking tools with loose clothing is the most dangerous fuxiu. May be haunted by the high-speed rotation of the tool and accidents. In outdoor work should wear masks.
8, the use of safety glasses. When more than a dust and dust, it is appropriate to wear masks.
9, don't waste lead. Do not drag wire moving tools, or pull out the plug, etc.. To avoid the wire touched objects and high sharp metal edge or wet oil.
10, fixed workpiece. The use of fixed clamp to cutting the workpiece. This is safer than holding the work piece by hand.
11, not to extend the tool. When working, must maintain the appropriate posture, must stand firm, not to hand over the tool to extract and process.
12, pay attention to maintenance tools. Cutting tools must always be sharp in order to obtain good processing performance and safety. According to the instruction of the instruction, add the lubricating oil and other accessories. Regular inspection lead. If the line is damaged, it should be replaced immediately. Handle to keep dry and clean, not with grease.
13, tools in the case of non use, to carry out maintenance, change the fixture, cutting tools. Pay attention to pull off the power.
14, remember to take the adjustment with tools and wrench, etc.. Before turning on the switch to turn the machine, it is required to check the adjustment tool of the cutter and the fixed use of the wrench.
In order to reduce accidents such as fire, electric shock, injury and so on, we must pay attention to the basic safety items listed below.
1, keep the workplace clean, use the belt machine most easily accident in the messy place or table.
2, pay attention to the workplace environment. Do not use electric tools in dark wet places. Abrasive belt machine can not get wet in the rain. The electric tool can not be used in the fuel gas, or in the presence of combustible gas.
3, do not let the child close. In the workplace should be banned people but can not let idlers touch tools or power supply connecting wires.
4, belt machine when not in use, should be kept in dry, and children can not come into contact with local, it is best to lock.
5, do not force the use of tools. Must be used at appropriate speed.
6, to use the tool, do not use a small tool or device to process this should use a large tool for the workpiece. Do not use the wrong tool.
7, pay attention to dress, the use of electric woodworking tools with loose clothing is the most dangerous fuxiu. May be haunted by the high-speed rotation of the tool and accidents. In outdoor work should wear masks.
8, the use of safety glasses. When more than a dust and dust, it is appropriate to wear masks.
9, don't waste lead. Do not drag wire moving tools, or pull out the plug, etc.. To avoid the wire touched objects and high sharp metal edge or wet oil.
10, fixed workpiece. The use of fixed clamp to cutting the workpiece. This is safer than holding the work piece by hand.
11, not to extend the tool. When working, must maintain the appropriate posture, must stand firm, not to hand over the tool to extract and process.
12, pay attention to maintenance tools. Cutting tools must always be sharp in order to obtain good processing performance and safety. According to the instruction of the instruction, add the lubricating oil and other accessories. Regular inspection lead. If the line is damaged, it should be replaced immediately. Handle to keep dry and clean, not with grease.
13, tools in the case of non use, to carry out maintenance, change the fixture, cutting tools. Pay attention to pull off the power.
14, remember to take the adjustment with tools and wrench, etc.. Before turning on the switch to turn the machine, it is required to check the adjustment tool of the cutter and the fixed use of the wrench.
