You are here：West Lake Grinding Wheel Factory > News > Technical Support > The rules for safe operation of belt machine
The rules for safe operation of belt machine
The rules for safe operation of belt machine
1, belt machine operator before operation, the first detection of leakage protector is sensitive and reliable, to ensure that the machine is effectively grounded, the cable has a broken skin phenomenon.
2, belt machine before starting to fasten, cuffs, long hair should bundle is good, no slippers. Remove the machine above and around the debris, not allowed to have any items placed in the feed port, do a good job of personal protection.
3, never use a scratch or crack belt. Belt installation, should ensure that the work roll surface is smooth, no dirt and indentation, confirm the belt running direction and belt on the back markers consistent; after the installation of belt, check the sanding device should be firmly locked.
4, in the operation of equipment and equipment are not completely stopped before the operation, the operator shall not leave.
5, after work, cleaning machine, ensure the material countertops and sanding roller surface does not stay in the dust; every month, with lubricating oil lubrication of the moving parts, and check the tensioning degree, using a gun to abrasive belt machine the oiling hole filling butter.
1, belt machine operator before operation, the first detection of leakage protector is sensitive and reliable, to ensure that the machine is effectively grounded, the cable has a broken skin phenomenon.
2, belt machine before starting to fasten, cuffs, long hair should bundle is good, no slippers. Remove the machine above and around the debris, not allowed to have any items placed in the feed port, do a good job of personal protection.
3, never use a scratch or crack belt. Belt installation, should ensure that the work roll surface is smooth, no dirt and indentation, confirm the belt running direction and belt on the back markers consistent; after the installation of belt, check the sanding device should be firmly locked.
4, in the operation of equipment and equipment are not completely stopped before the operation, the operator shall not leave.
5, after work, cleaning machine, ensure the material countertops and sanding roller surface does not stay in the dust; every month, with lubricating oil lubrication of the moving parts, and check the tensioning degree, using a gun to abrasive belt machine the oiling hole filling butter.
