You are here：West Lake Grinding Wheel Factory > News > Technical Support > Belt machine tips
Belt machine tips
Belt machine tips
Abrasive suspension
The belt before use should be at least 2-5 days of suspension, its purpose is to eliminate curl due to packaging. The packing belt hanging on the belt support 100-200mm diameter pipe or on the special. Pipe length should be greater than belt width or belt to fall off or trumpet; tube should be a level, otherwise easy to damage belt edge. Should conform to the belt hanging belt the environmental temperature and humidity of storage conditions, the simplest way is in a sealed room, with few lamp 40W or 64W lighting to keep dry.
Appearance check
Rear suspension belt before use should be necessary for the appearance of quality inspection, the inspected belt joint whether level off, firm; abrasive belt surface hole, sand group, lack of sand, glue spots, wrinkles; belt edge is neat and cracks, if there is a smaller gap edge, cut (cut into circular arc) does not affect the use.
The use of belt
Only a reasonable selection, proper use of abrasive belt, and belt use in a variety of problems can be solved correctly, displays the superiority and abrasive belt grinding of the best grinding performance, in order to ensure the quality of workpiece.
Abrasive suspension
The belt before use should be at least 2-5 days of suspension, its purpose is to eliminate curl due to packaging. The packing belt hanging on the belt support 100-200mm diameter pipe or on the special. Pipe length should be greater than belt width or belt to fall off or trumpet; tube should be a level, otherwise easy to damage belt edge. Should conform to the belt hanging belt the environmental temperature and humidity of storage conditions, the simplest way is in a sealed room, with few lamp 40W or 64W lighting to keep dry.
Appearance check
Rear suspension belt before use should be necessary for the appearance of quality inspection, the inspected belt joint whether level off, firm; abrasive belt surface hole, sand group, lack of sand, glue spots, wrinkles; belt edge is neat and cracks, if there is a smaller gap edge, cut (cut into circular arc) does not affect the use.
The use of belt
Only a reasonable selection, proper use of abrasive belt, and belt use in a variety of problems can be solved correctly, displays the superiority and abrasive belt grinding of the best grinding performance, in order to ensure the quality of workpiece.
